Canon PowerShot S400 Digital Elph User Manual page 106

104 Printing
To the BJ Printer
Interface Cable
This shows when
a BJ printer is
connected.
• On Bubble Jet printers with operation panels, images cannot be
printed through the operation panel while the camera is connected.
• The following cannot be conducted while the printer is connected.
- Playing movies
- Setting the language with the
• When the printer is disconnected, the
disappear from the LCD monitor and the camera will revert
to the standard replay mode.
• Use the following procedures to datach the cable from the
camera and printer.
1. Detach the cable from the printer.
2. Shut off the camera's power.
3. Detach the cable from the camera.
• Ensure that you grip the connector's sides when you detach
the cable from the camera's DIGITAL terminal.
combination.
• Turn the Bubble Jet printer's power on
after you have connected the power
cord to the Bubble Jet printer and
inserted the other end in a power
outlet.
• Attach the interface cable to the Bubble
Jet printer.
• Open the camera's terminal cover and
insert the cable's connector into the
camera's DIGITAL terminal. Orient the
cable so that the word Canon on the
connector faces the camera's front
panel.
• Set the mode switch to the
and turn on the camera's power.
• will display when the printer is
correctly connected.
position
and the button
or symbol will