More BYO Setup

BYO MODEM SETUP

FTTN/B CONNECTIONS
Step 1.
Locate the telephone wall socket in your property that has been activated for
NBN. Please note that there may be multiple telephone wall sockets in your
property.
Step 2.
Disconnect all equipment from your telephone sockets. This includes phones and
fax machines plugged in around the property. These devices will interfere with the
NBN signal.
Step 3.
Connect your BYO modem to the telephone wall socket using the DSL or VDSL
port on the back of the modem and power it on. It is important to use the first
(main) socket at your property. If you are unsure of this, you may require a
private phone technician to check your wiring.