Advertisement
Table of Contents
How to connect your new Netcomm NF18ACV nbn™ modem to
your new FTTN/B nbn™ connection
1. Locate the main telephone socket for the telephone number that was
activated for nbn™. This would usually be your home telephone socket on
the wall.
2. Un-box your new Netcomm NF18ACV and plug it into the mains power.
3. Locate the white telephone cable that is included with the Netcomm
modem. Plug this from the main telephone socket to the DSL port on the
back of your new modem.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for More Netcomm nbn NF18ACV
Summary of Contents for More Netcomm nbn NF18ACV
- Page 1 How to connect your new Netcomm NF18ACV nbn™ modem to your new FTTN/B nbn™ connection 1. Locate the main telephone socket for the telephone number that was activated for nbn™. This would usually be your home telephone socket on the wall. 2.
- Page 2 4. You can connect computers or other devices to the yellow LAN ports on the back of the device. 5. You will find the Wifi network name and passcode on a card in the Netcomm box. 6. The modem should be pre-configured and ready to use. If you have difficulties try following the troubleshooting tips later in this document or call 1800 733 368 for assistance...
- Page 3 Troubleshooting Tips 1. If the DSL light does not stop flashing after 1-2 minutes after plugging the Netcomm device in, this suggests that: i) The telephone socket that you have plugged the phone cable in to is not active for nbn™. ii) The cable used to connect the modem to the telephone socket is faulty.
Need help?
Do you have a question about the Netcomm nbn NF18ACV and is the answer not in the manual?
Questions and answers