Operating Instruction - Beko RHO7123 User Manual

4

Operating instruction

1. Plug in the heater.
2. Turn the thermostat knob to the maximum position.
3. Switch the heater on by setting the power switch to the desired heat setting.
• 1 — Low heat
• 2 — Medium heat
• 3 — High heat
The power indicator light will illuminate.
4. When the room has reached the required temperature, turn the thermostat knob slowly
anticlockwise until the power indicator light go out (or until a click is heard).
5. Turn the thermostat knob to this position to set the desired temperature.
The power indicator light will turn on and off, indicating the thermostat is keeping room
temperature at the selected setting.
6. To turn the heater off, set the power switch to the "0" position and remove plug from the mains
socket.
C
Note: The heater features a tip-over switch. If the heater tips over, it will automatically
switch off. Once placed back into the upright position, the heater will automatically
switch on again.
Overheat protection
The heater is equipped with a safety device. The safety device will trip and turn the heater off in the
event of overheating.
10 / 13 EN
Oil filled heater / User Manual