Connecting The Camera To The Computer - Canon PowerShot S45 Quick Start Manual

• The installation starts.
• If you installed the WIA driver or the TWAIN driver, the following message will
appear once the installation is complete. Click [OK].
When the installation is over, select [Yes, I want to restart my
4
computer now.] in the screen below and click [Finish].
• Remove the Canon Digital Camera Solution Disk once the installation is complete
and before you connect the camera to the computer so that the proper driver can
be installed.

Connecting the Camera to the Computer

Connect one end of the USB
1
cable to the computer's USB
port.
USB port
USB cable
19