Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for IEP 30917
Summary of Contents for IEP 30917
- Page 1 Operating Instructions Balancer for Multifunction Plug (30917)
- Page 2 Imprint: All Rights Reserved. Duplication of these instructions or parts thereof by any reproduction method whatsoever is prohibited without the prior permission of Industrieelektronik Pölz GmbH. These operating instructions do not represent a contractual relationship. We reserve the right to make changes errors and omissions excepted. ©...
-
Page 3: Table Of Contents
OPERATING INSTRUCTIONS Balancer ABLE OF CONTENTS Introduction ....................4 Liability and Warranty ....................4 Customer Service ..................... 4 About these Operating Instructions ................4 Explanation of Symbols and Instructions ..............5 Safety Information ..................5 Intended Use ......................5 Description of the Device ................6 Device Types ...................... -
Page 4: Introduction
OPERATING INSTRUCTIONS Balancer 1 Introduction 1.2 Customer Service If you need technical information or have • The balancer pulls the multifunction any queries or need to order spare parts, plug including the cable above head please contact your local dealer or e-mail height and keeps your workplace our customer service: office@poelz.at... -
Page 5: Explanation Of Symbols And Instructions
OPERATING INSTRUCTIONS Balancer 1.4 Explanation of Symbols and ards and guidelines and recognized tech- nical regulations. However, incorrect use Instructions can lead to physical harm to users or damage to the balancer or other material This symbol warns you of a assets. -
Page 6: Description Of The Device
3.3 Device Overview Device 3.1 Device Types In these operating instructions, we will describe the following device types. • Balancer for multifunction plug Item number: 30917 3.2 Type Plate ① Fastening holes ② Housing ③ Rotary knob for setting the load-bearing capacity ④... -
Page 7: Installation
OPERATING INSTRUCTIONS Balancer 4 Installation 4.2 Installing the Balancer You can install the balancer on the wall or Danger! on the ceiling by attaching it to a suitable bracket. The bracket must be attached Mount the balancer such that securely to the ceiling of the hall and have it does not endanger anybody. -
Page 8: Installing The Balancer In A Movable Position
OPERATING INSTRUCTIONS Balancer 4.2.2 Installing the Balancer in a 4.3 Suspending a Load Movable Position Danger! Note! When suspending a load, hold We recommend installing the the rope tight, e.g. on the rope balancer in a movable position clamp (⑤); otherwise, it could to ensure that the rope is not fly back and cause injuries. -
Page 9: Increasing The Load-Bearing Capacity
OPERATING INSTRUCTIONS Balancer 4.4.3 Setting the Rope Length The arrows on the housing (②) show the direction of rotation to increase or reduce If you want to set a rope length of less the load-bearing capacity. than 1.6 m, proceed as follows: 4.4.1 Increasing the Load-bearing 1. -
Page 10: Operation
OPERATING INSTRUCTIONS Balancer 5 Operation 7 Service Check the condition of the rope (⑥) at Danger! regular intervals. Servicing work must only be carried out by qualified people On a regular basis, check that the parts who have been tasked with this under load are secure and have not been work. -
Page 11: Appendix
Fastening holes Ø 8 mm Weight 0.790 kg approx. Housing Die-cast aluminium Item number 30917 8.2 Disposal 8.3 Declaration of Conformity (DoC) The CE mark confirms conformity of the Balancer device with the relevant EU directives. At the end of its useful life, never throw... - Page 12 Central Office Office Germany Industrieelektronik Pölz GmbH IEP Pölz GmbH Großendorf 122 Laufener Straße 15a 4551 Ried im Traunkreis, Austria 83395 Freilassing, Germany Tel.: +43 (0)7588 - 70 122 Tel.: +49 (0)8654 - 478 670 Fax: +43 (0)7588 - 70 125...
Need help?
Do you have a question about the 30917 and is the answer not in the manual?
Questions and answers