Related Manuals for LG Innotek LTD-VL2000
Summary of Contents for LG Innotek LTD-VL2000
-
Page 1: Table Of Contents
User Guide for LTD-VL2000 (Eagle) Product : LTE/CDMA(EVDO) Wireless Modem Model name : LTD-VL2000 Table of Contents 1. Overview 2. Major feature 3. Interface 4. Electrical specification 5. RF specification 6. Mechanical specification 7. General specification 8. Connector 9. RFx information 10. -
Page 2: Overview
1. Overview The LTD-VL2000 is achieved as personal mobile communication devices of the compact radio equipment, the latest design of the parts becoming smaller, lighter weight having the LTE(700/1700MHz), CDMA(850/1900MHz) bands. It is the vehicle’s telematics system that connect with LTE and CDMA(EVDO) wireless network and the wireless module with voice and data communication. -
Page 3: Major Feature
2. Major feature Dimension 86.2(L) x 78.1(W) x 7.0(T) mm Weight 48g(max) Interface USB, General Purpose I/O pins Mechanical Antenna FAKRA Connector Operation : -20℃ ~ +70 ℃ Temperature * Storage : -40 ℃ ~ +85 ℃ Main Chipset MDM 9615 Memory 2048Mb(NAND) / 1024Mb(SDRAM) 3GPP Rel.9 LTE... -
Page 4: Interface
3. Interface 3.1 Pin output Customer P/N is connected with outer device using 40 pin connector Figure 1. Connector pin arrangement Copyright ⓒ. 2014. All Rights Reserved. - Page 5 3. Interface 3.2 Pin description Signal Name Type Description USB-NAD_D+ USB Differential data line (+) USB-NAD_D- USB Differential data line (-) USB_POW_ON Control line USB Power Supply USB-GND USB-Ground internal connected to GND D_Audio_NAD_SCLK PCM Interface bit clock line Audio D_Audio_NAD_LRCK PCM Interface frame clock line D_Audio_NAD_SDTI...
- Page 6 3. Interface 3.3 USB It is supported with universal serial bus for high data communication. And It is satisfied with USB2.0 specification and supported with max.480Mbps Pin I/O Pin NO. Signal Name Function Description (Modem host) USB-NAD_D+ USB Differential data line (+) USB-NAD_D- USB Differential data line (-) USB_POW_ON...
- Page 7 3. Interface 3.4 Audio This module is provided with PCM interface. The resistor of pulled-up or pulled-down in this pin must be over 50Kohm. Pin I/O Pin NO. Signal Name Function Description (Modem host) D_Audio_NAD_SCLK PCM Interface bit clock line D_Audio_NAD_LRCK PCM Interface frame clock line D_Audio_NAD_SDTI...
-
Page 8: Electrical Specification
4. Electrical specification 4.1 Power supply specification A Module Power supply(KL30) is delivered on DC 12V, 1.5A from host system. In Module internal power supply, it is design for power management integral circuits to distribute constant voltages, and can control the each power block to minimize the power consumptions. - Page 9 4. Electrical specification 4.2 Logic level specification 4.2.1 Digital logic level specification Table 6. Digital logic level specification Copyright ⓒ. 2014. All Rights Reserved.
-
Page 10: Rf Specification
5. RF specification 5.1 CDMA 5.1.1 Receiver .- Bandwidth : 1.25MHz .- Frequency : 869MHz – 894MHz (BC0), 1930MHz – 1990MHz (BC1) .- RF to Baseband Direct conversion (Zero IF) .- Modulation method : QPSK, 8PSK and 16QAM .- Sensitivity : ≤-104dBm (PER = Under 0.5%) 5.1.2 Transmitter .- Frequency: 824MHz –... -
Page 11: Mechanical Specification
6. Mechanical specification 6.1 Mechanical dimensions Dimensions 86.2(L) x 78.1(W) x 7.0(T) mm Weight 48 grams(max.) Modem Interface connector ISMA-9827B-40Y955 (Manufacture vendor : IRISO) 59S2DA-40MT5_D Modem Antenna Connector (Plug) (Manufacture vendor : Rosenberger) Table 7. Mechanical specification Figure 2. Mechanical dimension Copyright ⓒ. - Page 12 6. Mechanical specification 6.1 Environment specification .- Storage Temp : -40℃ ~ +85℃ .- Operating Temp : -20℃ ~ +70℃ (-20℃ ~ +70℃ : 3GPP specifications are satisfied -30℃~-20℃, +70℃~+80℃ : It can be performance degradation) .- Operating humidity : 80% (60℃) relative humidity Copyright ⓒ.
-
Page 13: General Specification
7. General specification 7.1 CDMA electrical specification CHANNEL Test item Spec. 1011/25 384/600 779/1175 4.4.5 Maximum Output Power 23.01~25.5dBm PASS PASS PASS 885 kHz to -42 dBc↓/30 kHz PASS PASS PASS 1.98 MHz Conducted Spurious 4.5.1 Emissions 1.98 MHz to -54 dBc↓/30 kHz (BC0) PASS PASS... - Page 14 7. General specification 7.2 LTE B4(20M) electrical specification Channel Spec. Test Temperature 시험 항목 2050 2175 2300 Normal, Temp L, 6.2.2 Maximum Output Power(class 3) 23±1.5dBm PASS PASS PASS Temp H Normal, Temp L, 6.3.2 Minimum Output Power -39dBm ↓ PASS PASS PASS...
- Page 15 7. General specification 7.3 LTE B13(10M) electrical specification Channel Spec. Test Temperature 시험 항목 2050 2175 2300 Normal, Temp L, 6.2.2 Maximum Output Power(class 3) 23±1.5dBm PASS PASS PASS Temp H Normal, Temp L, 6.3.2 Minimum Output Power -39dBm ↓ PASS PASS PASS...
-
Page 16: Connector
8. Connector 8.1 Antenna Connector : 59S2DA-40MT5_D (Vendor : Rosenberger) Copyright ⓒ. 2014. All Rights Reserved. - Page 17 8. Connector 8.2 40Pin Connector : ISMA-9827B-40Y955 (Vendor : IRISO) Copyright ⓒ. 2014. All Rights Reserved.
-
Page 18: Rfx Information
9. RFx Information The RF field strength of the wireless module or modules that may be embedded in your TCU is well all international RF exposure limits as known at this time. Because the wireless modules(which may be embedded into your TCU) emit less energy than is allowed in radio frequency safety standards and recommendations, manufacturer believes these modules are safe for use. -
Page 19: Fcc Approval
10. FCC Approval This Module complies with parts 22, 24, 27 of the FCC rules. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This module should be installed and operated with minimum distance 20cm between the radiating element of this device and the user.
Need help?
Do you have a question about the LTD-VL2000 and is the answer not in the manual?
Questions and answers