Specifications - Sony STR-DA3200ES Operating Instructions Manual

Multi cjhannel av receiver
Hide thumbs Also See for STR-DA3200ES:
Table of Contents

Advertisement

Remote control
The remote does not function.
• Point the remote at the remote sensor on
the receiver.
• Remove any obstacles in the path between
the remote and the receiver.
• Replace all the batteries in the remote with
new ones, if they are weak.
• Make sure that the command modes of the
receiver and the remote are the same. If the
command mode of the receiver and the
remote are different, you cannot operate
the receiver with the remote (page 40).
• Make sure you select the correct input on
the remote.
• When you operate a programmed non-
Sony component, the remote may not
function properly depending on the model
and the maker of the component.
Error message
If there is a malfunction, the display shows
a code of two numbers and a message. You
can check the condition of the system by the
message. Refer to the following table to
solve the problem. If any problem persists,
consult your nearest Sony dealer.
PROTECTOR
Irregular current is being output from the
speakers, or the upper panel of the receiver
is covered with something. The receiver will
automatically turn off after a few seconds.
Check the speaker connection and turn on
the power again.
Reference sections for clearing
the memory
To clear
All memorized settings
Customized sound fields

Specifications

Amplifier section
POWER OUTPUT
Rated Power Output at Stereo Mode
Reference Power Output at Stereo Mode
Reference Power Output
Reference Power Output
Reference Power Output at Stereo Mode
Reference Power Output at Stereo Mode
See
page 39
page 81
1) 2)
(8 ohms 1 kHz, THD
0.7%):
125 W + 125 W
2)
(4 ohms 1 kHz, THD
0.7%):
125 W + 125 W
(8 ohms 20 Hz – 20 kHz,
THD 0.09%)
2)
FRONT
:
120 W + 120 W
2)
CENTER
:
120 W
2)
SURROUND
:
120 W + 120 W
2)
SURROUND BACK
:
120 W + 120 W
(4 ohms 20 Hz – 20 kHz,
THD 0.15%)
2)
FRONT
:
120 W + 120 W
2)
CENTER
:
120 W
2)
SURROUND
:
120 W + 120 W
2)
SURROUND BACK
:
120 W + 120 W
(8 ohms 1 kHz, THD
10%):
150 W + 150 W
(4 ohms 1 kHz, THD
10%):
150 W + 150 W
continued
121
GB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents