Table of Contents
Advertisement
Multi Card Slot
Using a Mini SD and RS-MMC
Since the above cards are too small, you cannot insert the cards
into the slot directly.
Insert the card into the dedicated adapter (available from most
electronic retailers) and then insert the adapter into the multi card
slot.
However, depending on the adapter's body material, some
RS-MMC cards may not be recognized properly. Samsung
recommend that you check the card is recognized correctly prior
to purchasing.
To remove a memory card
Press the card until it pops up, then pull it out by holding the end
of the card.
(Optional)
To format a memory card
When using the memory card for the first time, you must format
the card before using it.
Formatting a card deletes all data saved on the card. If the
card includes data, backup the data before formatting it.
1
Click Start > Computer.
2
Right-click over a card drive with the touchpad and select
Format.
3
Click Start to the formatting.
To use a card to exchange data with a digital device such
as a digital camera, formatting the data using the digital
device is recommended.
When you try to use a card, which is formatted in the
computer, in another digital device, you may have to
format the card again in the device.
You cannot format, write or delete data from a SD, or SDHC
card with a write protection tab when it is in the Lock
position.
Inserting and removing a memory card repeatedly may
damage the memory card.
Chapter 2.
49
Using the computer
Advertisement
Table of Contents
