Playback; Selecting A Component - Sony HTP-36SS Operating Instructions Manual

5
Press control button V/v
repeatedly to select "T. TONE
Y".
The test tone is output from each speaker
in sequence as follows:
Front left t Center t Front right t
Surround right t Surround left t
Sub woofer
6
Adjust the speaker levels and
balance using the LEVEL menu
so that the level of the test tone
sounds the same from each
speaker.
For details, see "Adjusting the level
(LEVEL menu)" (page 31).
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +/–. You can also
use MASTER VOLUME on the receiver.
• The adjusted value are shown on the display
during adjustment.
To turn off the test tone
Repeat steps 1 to 5 above. Then, select
"T. TONE N" in step 5.
24 GB

Playback

Selecting a component

1 VIDEO 1 VIDEO 2
2CH A.F.D.
1 2
4 5
7 8
>10/
-
0/10
CLEAR
DISPLAY
F
G
f
RETURN/EXIT
TV CH –
PRESET – REPLAY ADVANCE
<
.
1
Press the input button to select
a component.
You can also use INPUT SELECTOR on
the receiver.
The selected input appears on the display.
Selected input
[Display]
VIDEO 1 or
VIDEO 2
[VIDEO 1 or
VIDEO 2]
DVD
[DVD]
SA-CD/CD
[SA-CD/CD]
TUNER
[FM or AM band]
SYSTEM STANDBY
DVD SA-CD/CD
TUNER AMP MENU
MOVIE MUSIC
DUAL MONO
3
FM MODE
6
D.TUNING
9
D.SKIP
MEMORY DVD MENU
ENTER
MUTING
TOOLS
MUTING
TV VOL
MASTER VOL
g
3
MENU
TV CH +
PRESET +
<
>
Components that can
be played back
VCR, etc., connected to
the VIDEO 1 or VIDEO 2
jack
DVD player, etc.,
connected to DVD jack
Super Audio CD/CD
player, etc., connected to
the SA-CD/CD jack
Built-in radio tuner