Table of Contents
Advertisement
Lock code security settings
Your device has a security option allowing you to lock your phone with a code.
When the code is set and turned on, no outgoing calls are allowed and the menu
cannot be accessed without entering the correct code first. This prevents
unauthorized outgoing calls or access to any information stored on your device.
The
Security
option is in the
Settings
option, you must enter a lock code. The default lock code may vary depending on
your wireless service provider. The preset lock code may be the last four digits of
your phone number, 1234 or 0000. If none of these work, contact your wireless
service provider for help.
You must enter the lock code to access the following
1. In the standby mode, select
Menu
2. Enter the lock code, and select OK. See "Change lock code," p. 76.
Go to functions
The
Go to
menu enables you to change the function of the left selection key on
your phone. With this function, you can quickly access your most frequently used
functions from the
Go to
menu in the standby mode.
Choose Go to functions
1. In the standby mode, select
Go to
2. Scroll up or down to highlight the desired function.
3. Select
Mark
to add a function or
4. Select
Done
when you have added all desired functions.
5. Select
Yes
to save the changes.
6. In the standby mode, select
Go to
selected in step 2.
Organize functions
1. In the standby mode, select
Go to
2. Scroll up or down to highlight the function you want to rearrange, and select
Move
>
Move
up,
Move
down,
3. Select
Done
>
Yes
to save the changes.
FCC DRAFT
P h o n e a t a g l a n c e
menu. The first time you access the Security
Security
option:
>
Settings
> Security.
>
Options
>
Select
options.
Unmark
to remove a function.
to display a list of the functions you
>
Options
> Organize.
Move to
top, or
Move to
bottom.
15
Advertisement
Table of Contents
