Advertisement
FR-1000/2000 Installation Manual
.
Introduction
Thank you for purchasing the FR-1000/2000 Fire Alarm Monitor. Fireboy-Xintex, Inc. is
very proud to be able to provide this product to you. You have selected a capable
system designed to provide years of reliable service under the most demanding
conditions.
The FR-1000/2000 Fire Alarm Monitor is a versatile, compact, modern, stylish, user-
friendly intelligent network system. Our Research and Development Team have
developed this system specifically for the marine environment using proven techniques
and materials, which will ensure a long life at sea.
The FR-1000/2000 provides features found only in expensive computer-based systems
on mega-yachts, but does so for a fraction of the cost. It is an economical and capable
alternative to simplistic monitoring systems. The FR-1000/2000 allows builders and
retrofitters to offer a system with maximum functionality.
18131 Rev 3.0
1
Advertisement
Table of Contents
Related Manuals for Fireboy- Xintex FR-1000
Summary of Contents for Fireboy- Xintex FR-1000
- Page 1 FR-1000/2000 Installation Manual Introduction Thank you for purchasing the FR-1000/2000 Fire Alarm Monitor. Fireboy-Xintex, Inc. is very proud to be able to provide this product to you. You have selected a capable system designed to provide years of reliable service under the most demanding conditions.
- Page 2 4. Wire the Battery + and Battery – leads to an appropriate voltage source (9- 30Vdc) 5. On the FR-1000 wire the detector loop to the White and Black wires connected to White (Zone +) and Black (Zone –). See following pages for diagrams.
- Page 3 18131 Rev 3.0...
- Page 4 Connecting One Sensor per Zone Wiring for door switches or contact sensors 2.2K EOL Resistor-12V Black (Zone -) 5.6K EOL Resistor-24V Black (Zone -) 2.2K EOL Resistor-12V 5.6K EOL Resistor-24V FR Harness FR Harness White (Zone +) 1k ohm L1 or Com White (Zone +) Normally open switch.
- Page 5 Connecting Apollo Sensors...
- Page 6 Connecting Orbis Sensors...
- Page 7 If the TEST button is pressed for three seconds the unit will go into Test mode. All LED’S and the alarm will turn on for five seconds. Electrical Specifications FR-1000/2000 Minimum (alarm current) = 10mA Operate voltage = 9 - 30vdc...
- Page 8 One (1) Year Limited Warranty This Warranty is in lieu of all other express or implied warranties. Seller warrants title, materials, and workmanship on Fireboy equipment and assigns, the original manufacturer’s warranty on those components manufactured by others, as permitted. Seller’s warranty shall be for a period of (1) one year from the date of sale to the ORIGINAL CONSUMER Fireboy-Xintex, Inc.
Need help?
Do you have a question about the FR-1000 and is the answer not in the manual?
Questions and answers