Setting The Date/Time - Canon PowerShot S3 IS Basic User's Manual

You will hear a start-up sound and see the start-up image when you
turn on the power (Advanced Guide: p. 117). However, when starting
with the viewfinder display, the start-up image is not displayed and
there is no start-up sound. Also the start-up image does not appear
when the viewfinder display is on in Shooting mode (Advanced Guide:
p. 16) or the A/V OUT terminal is connected to a TV.
Turning on the camera without the start-up sound and image.
Press and hold the
turn the power on with the LCD monitor closed.

Setting the Date/Time

1
Turn the camera on (p. 3).
2
Select the item you wish to set
using the
set its value using the
button (a).
3
Confirm that the correct time
is displayed and press the
SET button (b).
The date/time can also be set in the
Set up menu (p. 16).
When you turn on the camera the first time, and when the lithium date/
time battery charge is low, the [Date/Time] menu appears.
4
button, then turn on the power. You can also
or button and
or
See the Advanced Guide: Replacing the Date Battery (p. 135)
See the Advanced Guide: Mute (p. 31)
See the Advanced Guide: Time Zone settings (p. 24)
a
b