Related Manuals for OBDPROG MT 401
Summary of Contents for OBDPROG MT 401
- Page 1 OBDPROG Register and upgrade guide OBDPROG Register and upgrade guide PartⅠ: Get serial number and register password 1. Turn on your device as follows: 2. Click “INFO” menu. Serial number and register password will be shown:...
- Page 2 Note: Serial number and register password differ in different device. Above picture is only for reference. For specific information, please be subject to the device you own. Part Ⅱ：Download OBDPROG Upgrade Tools on the website 1. Login our website: www.obdprog.com...
- Page 3 OBDPROG Register and upgrade guide 2. Click “Click a key to upgrade” as follows: 3. Download upgrade tool as shown below: 4. Install upgrade tool and open OBDPROG Upgrade Tools.
- Page 4 OBDPROG Register and upgrade guide Part Ⅲ Register through OBDPROG upgrade tool. 1. Open OBDPROG Upgrade Tools and Click “Sign Up” to begin registration. 2. Fill in the information below:...
- Page 5 OBDPROG Register and upgrade guide 3. For example: Input the serial number and register password you get in PartⅠ. Input distributor code. (It’s 860010A1 or 85200001 in general. If not correct, please contact the seller.) Set your username and password yourself.
- Page 6 Then insert the card reader into the computer. For those items without TF card inside ,please operate as follows to update your device: Please connect your device with the computer via USB. 1. Open OBDPROG Upgrade Tools. Login with username and password.
- Page 7 OBDPROG Register and upgrade guide 2. Click “Select All” and “Upgrade” as shown below: 3. Upgrade succeeds!
- Page 8 OBDPROG Register and upgrade guide 5. After update, there will be some files in your TF card like below. 6. For those devices with TF card: Please remove off the TF card from the computer and then insert the TF card into your device. Turn on your device to check it.
Need help?
Do you have a question about the MT 401 and is the answer not in the manual?
Questions and answers