Wor Mode （Mode 1; Configuration Mode; Deep Sleep Mode （Mode 3; Register Read And Write Control - Ebyte E22-400T30S1C User Manual

Chengdu Ebyte Electronic Technology Co., Ltd.
6.3 WOR mode（Mode 1）
Type M0 = 1，M1 =0
Transmitting When defined as a transmitting party, a preamble is automatically added before transmitting.
Receiving It can receive data normally, the receiving function is the same as mode 0.
6.4 Configuration mode（Mode 2）
Type M0 = 0，M1 = 1
Transmitting Wireless transmitting off
Receiving Wireless receiving off
Configuration Users can access the registers to configure the module's operation state.
6.5 Deep sleep mode（Mode 3）
Type M0 = 1，M1 = 1
Transmitting Unable to transmit wireless data
Receiving Unable to receive wireless data
When from the sleep mode to other modes, the module will reconfigure the parameters. During the configuration
Note
process, AUX will remain low; After configuration,it outputs high level, we suggest that user test rising edge AUX.

7 Register read and write control

7.1 Command format

In configuration mode (mode 2: M1 = 1, M0 = 0), the list of supported commands are as follows (only 9600, 8N1 format is
：
supported when)
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
E22-400T30S1C User manual
15