Filter Cleaning - Mitsubishi Electric MSZ-WG18VA-H1 Operating And Installing Instructions

Filter Cleaning

Filter Cleaning (Cleaning is done once two weeks)
1
Pull out the filter slightly.
Filter
Remove
Note
During disassembly of the filter, take care not to touch the
metallic part of the indoor unit, as you may be scratched.
2
Use a cleaner to clean or use water to wash.
• Don't clean the filter with brush or hard sponge,
otherwise, the filter will be distorted.
• If the filter is too dirty, use warm solution mixed with
neutral detergent to wash the deodorizing filter.
• Don't use hot water (about over 50℃) to wash the
filter to avoid distortion.
After washing with water, the filter can't be used
3
until it is dried.
·Don't dry the filter under sunshine or with fire.
Open the front
panel, Remove/
replace the filter
4
Installing the filter.
14
Installation