Table of Contents
Advertisement
Fault
flashes.
All other error codes.
The appliance is not
working.
The programme does
not start.
The door cannot
be opened.
Cause and troubleshooting
Door is not closed.
Close the door.
1.
Press Start/Nachlegen to start the programme.
2.
Malfunction
Call the after-sales service.
▶
→ "Customer Service", Page 59
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker is faulty.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your kitchen or other
▶
appliances are working.
You have not pressed Start/Nachlegen.
Press Start/Nachlegen.
▶
Door is not closed.
Close the door.
1.
Press Start/Nachlegen to start the programme.
2.
Childproof lock is activated.
→ "Deactivating the childproof lock", Page 41
▶
Fertig in is activated.
Check whether Fertig in is activated.
▶
→ "Buttons", Page 23
Laundry is caught in the door.
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press Start/Nachlegen to start the programme.
4.
– – – – is activated.
Continue the programme by selecting Schleudern
▶
or Abpumpen and pressing Start/Nachlegen.
→ "Resuming the programme when the programme
status is Rinse Hold", Page 40
The temperature is too high.
Wait until the temperature has dropped.
▶
→ "Cancelling the programme", Page 40
▶
Water level is too high.
Start the Abpumpen programme.
▶
Power failure.
Troubleshooting en
51
Advertisement
Table of Contents
