Recording A Programme - Sony DAR-RH1000 Operating Instructions Manual

2. Recording a Programme

HDD + RW - RW
This section introduces the basic operation to
record the current TV programme to the hard disk
(HDD) or to a disc (DVD). For an explanation of
how to make timer recordings, see page 48.
HDD
DISPLAY
z REC
REC MODE
1
Press HDD or DVD.
When you record to a DVD, insert a
recordable DVD (see "Inserting a disc" on
page 36).
2
Press PROG +/– to select the programme
position or input source you want to
record.
3
Press REC MODE repeatedly to select the
recording mode.
Each time you press the button, the display on
the TV screen changes as follows:
HQ
SEP
For more details about the recording mode,
see page 48.
38
- RW + R
VR
Video
DVD
1 2 3
PROG +/–
4 5 6
7 8 9
t TV/DVD
0
X REC PAUSE
x REC STOP
HSP SP LSP
SLP EP
4
Press z REC.
Recording starts.
Recording stops automatically after eight
hours of continuous recording or when the
- R
HDD or DVD is full.
To stop recording
Press x REC STOP located beneath the remote
control cover.
Note that it may take a few seconds for recorder to
stop recording.
To pause recording
Press X REC PAUSE located beneath the remote
control cover.
To restart recording, press the button again.
To watch another TV programme while
recording
If your TV is connected to the LINE 1 – TV jack,
set your TV to the TV input using the t TV/
DVD button and select the programme you want
to watch.
If your TV is connected to the LINE OUT or
COMPONENT VIDEO OUT jacks, set the TV to
TV input using the t TV/DVD button (page 88).
TV Direct Rec
If you use the SMARTLINK connection, you can
easily record what you are watching on your TV.
When the TV is turned on, press
recorder automatically turns on and starts
recording what you are watching on the TV.
Note
If "TV" appears in the front panel display, you cannot
turn off the TV or change the programme position during
TV Direct Rec. To turn off the function, set "TV Direct
Rec" to "Off" in "Features" setup (page 98).
LP
z
REC. The