Advertisement
STICK MIXER OPERATION
1.
Before ´Ust use, the blender blade accessory must be cleaned. Wash the blades
with warm water and mild detergent. Rinse with fresh water and allow to dry.
Your stick mixer is now ready for use.
2.
Ensure unit is unplugged from wall power outlet.
3.
Insert blender blade attachment into stick mixer body until it locks.
4.
Ensuring your ´QJHUV are not pressing either of the buttons on the front of the
unit, plug the power cord into the power outlet and switch on.
5.
Add ingredients into an appropriate mixing container.
6.
Press the on/off or turbo button to start the mixer.
7.
After use, unplug from the wall power outlet.
8.
Press the easy release buttons either side of the stick mixer body simultaneously
to release the blender blade attachment.
WARNING The stick mixer and chopper blades are very sharp, avoid touching
them and handle with care.
WARNING Do not plug the appliance into power before it is fully assembled.
WARNING Exercise caution when removing the attachments from the stick mixer
DQG HQVXUH WKH DSSOLDQFH LV WXUQHG RII DQG XQSOXJJHG ZKLOVW ´WWing attachments.
WARNING Do not blend hot or boiling foods or liquids as there is a risk of burns
or scalding.
CAUTION It is not recommended to run the stick mixer continuously for more
than 1 minute at a time for light substances. Do not mix dry, thick or heavy mixtures
continuously for more than 15 seconds. Stop the operation and stir the ingredients
before continuing. Allow the motor to rest for 1 minute between each use.
NOTE: All stick mixers are designed to operate only when the power buttons remain
depressed.
© 2018 RVM Australia Pty Ltd. All Rights Reserved
5
Advertisement
