Basic Functions; Turning The Power On/Off - Canon PowerShot A95 User Manual

Basic Functions

Turning the Power On/Off

Turning the Camera On
1
Press the ON/OFF button until the
power lamp lights green (p. 14).
Shooting Mode
Current shooting settings will appear in the
LCD monitor.
Current shooting settings will disappear in
approximately 6 seconds when the LCD
monitor is set to Standard (No Information)
or off (p. 26)
Playback Mode
The LCD monitor displays an image.
Turning the Camera Off
1
Press the ON/OFF button again to
turn the power off.
You will hear a start-up sound and see
the start-up image when the power is
turned on. (To change the start-up
sound and image, see pages 71, 74 and
120.)
The start-up image does not appear
when the LCD monitor is off in Shooting
mode or the A/V OUT terminal is
connected to a TV.
Turning on the camera without the
start-up sound and image
Press and hold the SET button, then
turn on the power.
Power Saving Function
This camera is equipped with a power saving
function. Depending on the power saving setting,
the camera may power down or the LCD monitor
may go off automatically.
Auto Power Down
[On]:
Shooting mode:
Powers down approximately 3 minutes after
the last time a camera control is accessed.
31