Replacing The Remote Control Battery - KEKAI Oregon KT0940 Instruction Manual

REPLACING THE REMOTE CONTROL BATTERY

When the remote control stops operating or its range seems reduced, it is
time to replace the battery with a new one.
1. The battery compartment is located on the back end of the remote.
2. Press and slide the battery door open and remove the old battery.
3. Insert a CR2025 battery, checking that the "+" and "-"terminals of the
battery matches the inside of the battery compartment.
4. Replace the battery compartment door.
DO NOT mix old and new batteries.
DO NOT use rechargeable silver oxide cell batteries with remote control unit.
DO NOT mix alkaline, standard (Carbon-Zinc), or rechargeable
(Nickel-Cadmium) batteries.
DO NOT dispose of batteries in fire. Improper disposal may cause batteries to
leak or explode.