KEKAI Oregon KT0940 Instruction Manual page 42

error correction function, Press the TIME button for 3 seconds,
and the display window will be displayed as 0. At this time, every
time you press the up or down key of the remote control, the
display window will be up +1 or down -1 accordingly, and the
correction range is between -9 and 9. If on the temperature
error correction mode, 10S no operate of the keypad or remote
control, then the display window will be turned back to the
room temperature display mode.
Screen protection function:
Temperature Limiting Control
This heater is equipped with a Temperature Limiting Control.
Should the heater reach an unsafe temperature, the heater will
automatically turn OFF. To reset:
1.Turn the ON/OFF switch on the CONTROL PANEL to
OFF. Wait 5 minutes.
2. Unplug the power cord from the outlet.
3. Inspect the fireplace to make sure no vents are blocked,
or clogged with dust or lint. If they are, use a vacuum to
clean the vent areas.
4. With the POWER switch in the OFF position, plug the
power cord back into the outlet.
5. If the problem continues, have your outlet and wiring
inspected by a professional.
Remote Control Battery Information
Small remote control uses one CR2025 battery(included)