Table of Contents
Advertisement
you do not need to configure it again);
Note: We will email you the gateway manual before shipping.
Step 2 Open the device and use a screwdriver to open the device as shown in
Figure 5.1 and Figure 5.2.
Step 3 Connect the device to the power supply and connect the battery to the
circuit board. (The default is not connected to the power supply. Please connect
the power supply before use.) The yellow marks are shown in Figure 5.3 and .
Note: After connecting the power supply, please use a screwdriver to fix the shell
of the device and tighten it to achieve a waterproof effect; then the sensor
function can be tested.
Figure 5.1
Beijing Dingtek Technology Corp., Ltd.
Tel:86-10-64718863,64753700
http://www.dingtek.com
E-mail: service@dingtek.com
7
Room A209, Flounder Business Park, Shunbai Road 12, Chaoyang District, Beijing, China 100022
Page
Advertisement
Table of Contents
Need help?
Do you have a question about the DF702 Series and is the answer not in the manual?