Table of Contents
Advertisement
Open the door.
1.
Make sure that the drum is empty.
Place the laundry in the drum.
2.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
13.5 Adding detergent and
care product
Notes
¡ Observe the information on safety
→ Page 4 and preventing material
damage → Page 10.
¡ Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
¡ Observe the information about de-
tergents and care products
→ Page 35.
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 18
If required, add the care product.
3.
Push in the detergent drawer.
4.
13.6 Starting the programme
Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press inicio pausa+carga.
▶
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows either the pro-
gramme duration or the "Ready in"
time.
a After the programme has ended,
the display shows: "End".
13.7 Adding laundry
Note: Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 10.
Press inicio pausa+carga.
1.
The appliance pauses.
appears, it is not pos-
Note: If
sible to add laundry.
When
goes out, it is possible to
add laundry.
Open the appliance door.
2.
Add or remove laundry.
3.
Close the appliance door.
4.
Press inicio pausa+carga.
5.
13.8 Cancelling the pro-
gramme
Note: Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 10.
Press inicio pausa+carga.
1.
Open the appliance door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
programme.
– If the water level is high, start
the
programme or select a
suitable programme for draining.
→ "Programmes", Page 24
Remove the laundry → Page 38.
3.
13.9 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Start the
programme or select a
1.
suitable programme for draining.
→ "Programmes", Page 24
Basic operation en
37
Advertisement
Table of Contents
