Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Woodley InSight
Summary of Contents for Woodley InSight
- Page 1 Operator’s Manual...
-
Page 2: Table Of Contents
Contents Product Description ........................3 Introduction ..........................3 Intended Use ........................... 3 Standard Accessories ......................3 Features ..........................3 Technical Specifications ......................4 Safety Precautions .......................... 4 Standard Parts Listing ........................5 Installation ............................6 Location and Mounting ......................6 Connecting Power Adaptor ..................... -
Page 3: Product Description
1. Product Description 1.1 Introduction This manual provides important safety information for the InSight Roller Mixer. It should be kept near the equipment for quick and easy reference. The rolling motion also provides gentle rocking for thorough mixing. The removable rollers can be set to suit tubes and bottles of different diameters. -
Page 4: Technical Specifications
• Never use the instrument in any manner not specified in this manual. • Equipment used in any manner not specified in this manual or by Woodley Equipment Company might result in the lapse of warranty. • Do not try to stop the roller by blocking/holding it. Do not attempt to remove rollers during operation. -
Page 5: Standard Parts Listing
In the event of contamination caused by aggressive agents, the device must be cleaned immediately using a natural cleaning liquid or refer to the MSDS (Material Safety Data Sheet) of the chemical for more information. If damage occurs, contact Woodley Equipment Company. -
Page 6: Installation
4. Do not place the device in a place where it could become difficult to operate. 4.2 Connecting Power Adaptor 1. Connect one side of the power adaptor to the rear side of the InSight Roller Mixer and the other to the power supply as shown in the figure below. -
Page 7: Removing And Installing Rollers
5. Removing and Installing Rollers 5.1 Removing Rollers Device rollers can be removed/changed by a simple push up and pull process. Open the hinge as shown in the image below and then remove the rollers. 1. Unscrew the hinge by rotating the rivet counter clockwise. 2. -
Page 8: Installing Rotors
5.2 Installing Rotors Follow the exact reverse process to insert the rollers back into the tube roller. The image below shows the step-by-step procedure to insert the rollers back into the unit. 6. Operation 6.1 Switch on the Device After connecting the power adaptor to the rear of the device, switch ON the main power supply, then switch ON the device from the rear. -
Page 9: Warranty
The warranty is invalidated by any non-factory modification which will immediately terminate all liabilities on Woodley Equipment Company for the product or damages caused by its use. The customer shall be responsible for the product or use of products as well as any supervision required for safety. - Page 10 Woodley Equipment Company Ltd UK Office: Old Station Park Buildings St. John Street Horwich Bolton BL6 7NY, UK Tel: +44 (0) 1204 669033 Email: sales@woodleyequipment.com Woodley Equipment Company Inc USA Office: Brooklyn Navy Yard Build 212, Suite 209 21 Flushing Avenue...
Need help?
Do you have a question about the InSight and is the answer not in the manual?
Questions and answers