Advertisement
Step 2
Secure the feet with the screws, washers and nuts already supplied, with the wheels of the rear feet
facing outwards. Use screw no. 5.
Step 3
While the legs are vertical, push the pin in completely and lower the treads. If the pin does not push in,
do not use force, but move the leg slightly to release the pin and try again.
© by WilTec Wildanger Technik GmbH
Item 62712
Page 6
http://www.WilTec.de
http://www.aoyue.eu
05 2021-1
http://www.teichtip.de
Advertisement
