Table of Contents
Advertisement
en Home Connect
Basic setting
Tone volume
Button volume
Wi-Fi
Remote Start
Factory setting
1
Factory setting (may vary according to model)
Changing basic settings
Press
.
1.
To open the basic settings, press
2.
for 3 seconds.
a The display shows H:xx.
a The display shows
Press
3.
the display shows the required set-
ting.
Press
or
4.
display shows the right value.
You can change several settings.
To save the settings, press
5.
for 3 seconds.
36
Display text
1
SL:02
1
bL:02
1
Cn:00
1
rc:01
rE:
.
repeatedly until
repeatedly until the
Selection
SL:00 -SL:03
bL:00 - bL:03
Cn:00 - Cn:01
rc:00 - rc:02
Start with
Y:ES
Confirm with
Home Connect
Home Connect
This appliance is network-capable.
Home Connect
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
Description
Adjustment of tone volume.
Level "SL:00" switches the signal
tone off.
Set the button volume during opera-
tion. Level "bL:00" switches the but-
ton tones off.
Switch the wireless network connec-
tion on or off.
Level "Cn:00" switches the wireless
network connection off.
Activate or deactivate
→ "Remote Start ", Page 37.
The following settings are possible:
¡ With the setting "rc:00", the func-
tion is permanently deactivated.
¡ With the setting "rc:01", the func-
tion can be selected via the
button.
→ "Activating Remote Start ",
Page 38
¡ With the setting "rc:02", the func-
tion is permanently activated.
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
Advertisement
Table of Contents
