4: Securing The Mains Lead - Sony WEGA KE-V42A10E Operating Instructions Manual

1
Connect your aerial with the supplied
coaxial cable.
If connecting to an aerial only (A)
Connect your aerial to the
the TV, then go to step 3.
If connecting to a VCR with an aerial (B)
Connect your aerial to the input socket on your
VCR.
2
Connect your VCR.
1 Connect the output socket on your VCR to the
socket on the rear of the TV with the RF
lead.
2 Connect the scart socket on your VCR to the
/ 2 scart socket on the rear of the TV
with a scart lead.
3
Connect the supplied mains lead to the AC
IN socket on the rear of the TV.
Note
Do not connect the mains lead to your mains socket until
all connections are complete.
4
Bundle the cable.
1 Attach the cable holder to the rear of the TV
(A), then turn the cable holder a quarter turn
to the left (B).
2 Push the clasp lever in to release the lock and
open the cover, and then insert the cables.
3 Close the cover until it clicks shut and locks.
1
B
A
2
3
12
GB
socket on the rear of
4: Securing the
mains lead
mains lead plug holder
(supplied)