Sony WEGA KLV-27HR3 Operating Instructions Manual page 16

5
The Auto Tuning menu appears on the screen. Press the OK
button to select Yes.
6
The TV starts to automatically search and store all
available broadcast channels for you.
7
After all available channels are captured and stored,
the Programme Sorting menu automatically appears
on the screen enabling you to change the order in
which the channels are stored.
a)
b)
8
Press the MENU button to remove the menu from the screen
Your TV set is now ready for use
16
First Time Operation
This procedure could take some minutes. Please be patient
and do not press any buttons, otherwise automatic tuning
will not be completed.
If no channels were found during the auto tune process, a
message appears automatically on the screen asking you to
connect the aerial. Check the aerial connection (refer to
page 14). Press the OK button to restart the auto tuning
process.
If you wish to keep the broadcast channels in the tuned order,
go to step 8.
If you wish to store the channels in a different order:
v V
Press the or button to select the programme
1
number with the channel (TV Broadcast) you wish
b
to move. Press the button.
v V
Press the or button to select the new
2
programme number position for your selected channel
(TV Broadcast). Press the OK button to store
Repeat steps b)1 and b)2 if you wish to change
3
the order of the other channels.
Do you want to start
automatic tuning?
Yes No
Auto tuning
Programmes found:
No channel found.
Please connect aerial
Confirm
Programme Sorting
01 TVE
02 TVE2
03 TV3
04 C33
05 C27
06 C58
07 S02
08 S06
09 C44
10 C47
11 C48
Exit:
MENU
Programme Sorting
01 TVE
02 TVE2
03 TV3
04 C33
01 TVE
C27
05
C58
06
07 S02
08 S06
09 C44
10 C47
11 C48
Exit:
MENU