Changing Basic Settings; Home Connect - Bosch SMV4EVX14E User Manual

en Home Connect
Basic setting
Remote start
Factory setting
1
Factory setting (may vary according to model)

Changing basic settings

Open the appliance door.
1.
Press ⁠ .
2.
To open the basic settings, press
3.
for 3 seconds.
a The display shows Hxx.
a The display shows
Press
4.
the display shows the required set-
ting.
Press repeatedly until the dis-
5.
play shows the right value.
You can change several settings.
To save the settings, press
6.
for 3 seconds.
Close the appliance door.
7.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
36
Display text Selection
1
rc1 rc0 - rc2
rE Start with
⁠ .
repeatedly until
Description
Activate or deactivate remote start.
The following settings are possible:
¡ With the "rc0" setting, remote
start is permanently deactivated.
¡ With the "rc1" setting, remote
start can be selected via the re-
mote start button.
→ "Remote start ", Page 37
¡ With the "rc2" setting, remote
start is permanently activated.
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
Home Connect
Home Connect
This appliance is network-capable.
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
To be able to use Home Connect,
you must first set up the connection
to the WLAN home network (Wi-Fi
and to the Home Connect app.
¡ → "Connecting the appliance to
WLAN home network (Wi-Fi)",
Page 37
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tips
¡ Please consult the documents sup-
plied by Home Connect.
1
)