Sony KDL-40Z5800 Instruction & Operation Manual page 135

Troubleshooting
• Operations are not guaranteed for all servers.
Also, operations differ depending on the
features of the server and the content in
question.
• Turn the connected device on.
Check Connections
• Check that the LAN cable and/or mains lead/
AC power cord of the server has not become
disconnected.
Check Settings
• Check that the connected device is registered
under "Server Display Settings" (83).
• Check that the server is correctly configured.
• Check that the selected device is connected
to the network and can be accessed.
• If the "IP Address Settings" in "Network"
under "Network Settings" is set to "DHCP
(DNS automatic)" or "DHCP (DNS manual)", it
may take some time to recognise devices if
there is no DHCP server. Execute "Server
Diagnostics" (83).
The TV cannot be found from renderer-
compatible device (the controller)
Check Connections
• Check that the LAN cable and/or mains lead
of the server has not become disconnected.
Check Settings
• Check if the "Renderer Function" is activated
(127).
135/139