Table of Contents
Advertisement
Installation and connection
en
Optional accessories
Order optional accessories
after-sales service:
Washer-dryer stack connection set:
■
To save space, the dryer can be
placed on top of a suitable washing
machine of the same width and
depth.
The dryer must be secured to the
washing machine using this
connection set.
Order number with pull-out worktop:
WTZ11400;
*
Depending on the model
18
*
from the
Transport and frost protection
:
Warning
Risk of injury/material damage/
damage to the appliance!
If you take hold of any of the
■
appliance's protruding parts (e.g. the
appliance door) in order to lift or
move it, these parts may break off
and cause injury.
Do not take hold of any of the
appliance's protruding parts in order
to move the appliance.
If the appliance is not transported
Ri s k of i n j u ry/materi a l damage/damage to the appl i a nce!
■
properly, this may result in injury,
material damage or damage to the
appliance.
Transport this appliance as
described on the packaging and
take note of the trolley symbol. If it is
unpacked, transport the appliance
on its side on a trolley.
Empty the condensate container.
1.
Select any programme using
2.
the programme selector.
Press the Start button.
3.
Wait for 5 minutes.
4.
The condensation is drained.
Note:
Empty the condensate container
5.
again.
Switch off the dryer.
6.
Despite draining, there will
Note:
always be some residual water in
the dryer.
Caution!
Any residual water may leak out
and cause material damage.
Transport the dryer in an upright
position.
Caution!
The dryer contains coolant and may be
damaged.
Allow the dryer to rest for two hours
before initial use.
Advertisement
Table of Contents
