Important Notice - Panasonic TX-55JZ2000E Operating Instructions Manual

Important Notice

Installing environment
This TV has "Space Tune" function which can adjust
the sound quality automatically according to TV and
viewer's position. With the left-center-right speakers and
the Upward-firing speakers using the upward-resonance
against the ceiling, the spatial sound space can be
achieved. The adjustment of the "Space Tune" function
automatically starts when the TV is turned on for the
first time after installing this TV and connecting with the
external equipment. Follow the on-screen instructions
for setting. (p. 22)
"Space Tune" can be adjusted with [Space Tune Auto]
which adjusts automatically by using the voice control
microphone on the remote control to measure and analyse
a test tone played back, or with [Preset Adjustment] where
you enter the TV's installation environment and the sound
quality is adjusted accordingly.
A loud sound (test tone) is output while setting with
[Space Tune Auto].
This function is effective only for the sound from TV
speakers.
The effect varies depending on the installing
environment.
<Example>
A
: Upward-firing speakers
4
English
Do not display any still part of the image
for a long period
In such cases the still part of the image remains dimly
on the screen ("image retention"). This is not considered
a malfunction and is not covered by the warranty.
Typical still image parts:
Still images shown continuously on the same area
‡
(ex. channel number, channel logo, other logos or
title image, etc.)
Still or moving pictures viewed in
‡
4:3 or 16:9 aspect ratio, etc.
Video games
‡
To avoid image retention, the screen saver may
be activated (OLED logo moves) or the on-screen
message may move after a few minutes if no signals
are sent or no operations are performed.
Set [Logo Luminance Control] to [Max] to avoid image
retention.
[eHELP] (Search by Purpose > Settings > Picture >
Screen Settings)
To avoid image retention, the screen may become
dim when the motionless image is displayed. This
is not a malfunction. The brightness of the screen
returns to the previous level when the active image is
displayed.
Be sure to turn the TV off with the remote control to
perform the panel maintenance. During the panel
maintenance, LED turns to orange. (p. 21) The
maintenance works as necessary.
Set aspect ratio to [4:3 Full] for 4:3 image. For details,
refer to [eHELP] (Search by Purpose > Watching >
For best picture > Aspect).
For more information
"Panel maintenance" (p. 21)