Installing The Wall-Hanging Bracket; Connections - Panasonic TX-55JZ2000E Operating Instructions Manual

Installing the wall-
hanging bracket
Please contact your local Panasonic dealer to purchase
the recommended wall-hanging bracket.
Holes for wall-hanging bracket installation
Rear of the TV
300 mm
300 mm
(View from the side)
Depth of screw
minimum: 12 mm
maximum: 39 mm
Diameter of screw
M6
Screw for fixing the TV onto the
wall-hanging bracket (not supplied with
the TV)
Warning
Using other wall-hanging brackets, or installing
a wall-hanging bracket by yourself have the risk
of personal injury and product damage. In order
to maintain the unit's performance and safety, be
absolutely sure to ask your dealer or a licensed
contractor to secure the wall-hanging brackets. Any
damage caused by installing without a qualified
installer will void your warranty.
Carefully read the instructions accompanying optional
accessories, and be absolutely sure to take steps to
prevent the TV from falling off.
Handle the TV carefully during installation since
subjecting it to impact or other forces may cause
product damage.
Take care when fixing wall brackets to the wall.
Always ensure that there are no electrical cables or
pipes in the wall before hanging bracket.
To prevent fall and injury, remove the TV from its fixed
wall position when it is no longer in use.

Connections

External equipment and cables shown are not
supplied with this TV.
Please ensure that the unit is disconnected from the
mains socket before attaching or disconnecting any
cables.
Check the terminal type and cable plugs are correct
for connection.
Use a fully wired HDMI compliant cable.
Keep the TV away from electronic equipment (video
equipment, etc.) or equipment with an infrared sensor,
otherwise distortion of image / sound may occur or
operation of other equipment may be affected.
Please also read the manual of the equipment being
connected.
Terminals
1
6 7 8 9
1 Model name plate
2 CI slot 1 - 2
3 Headphone / Subwoofer jack
(3.5 mm stereo mini plug)
4 USB 2 - 3 port
This symbol indicates DC operation.
5 HDMI 4
6 DIGITAL AUDIO
7 ETHERNET terminal
Use Shielded Twist Pair (STP) LAN cable.
8 AV IN
9 HDMI 1 - 3
10 USB 1 port
This symbol indicates DC operation.
11 Satellite terminal
12 Terrestrial / cable terminal
2
3
4
5
10
11
12
English
13