Advertisement
|
APPLICATION
The 75F® Smart Damper™ is to be used as part of the 75F®
Dynamic Airflow Balancing™ solution. The Smart Damper will be
paired with a 75F® Smart Node™ which will provide power and
control.
|
PRECAUTIONS
•
Be sure Smart Node is accessible for wiring.
•
When installing multiple dampers in a zone, only provide the
24VAC power bus line to one of the two Dampers. The Smart
Node will be attached to the primary damper.
•
Failure to wire devices with the correct polarity when using a
shared transformer may result in damage to any device
powered by the shared transformer.
•
Disconnect power before installing. Never connect or
disconnect wiring with the power applied.
•
Do not run the low voltage wiring in any conduit with line
voltage.
•
Install in accordance with all State and local codes.
|
FEATURES
•
Modulation of airflow through the duct controlled by the 75F
Dynamic Airflow Balancing™ solution.
•
Monitors airflow temperature.
|
SPECIFICATIONS
Smart Damper
•
Supply Voltage: 24VAC
•
Operating Environment: 41°F – 122°F
•
Dimensions: (H) 6"; Diameter 6, 8, 10, 12", or custom sizes
•
Enclosure: Metal sheath
INSTALLATION & OPERATION INSTRUCTIONS
75F® Smart Damper™ | RADIAL
www.75f.io
888.590.8995 x2
Advertisement
Table of Contents
Related Manuals for 75F Smart Damper
Summary of Contents for 75F Smart Damper
- Page 1 INSTALLATION & OPERATION INSTRUCTIONS 75F® Smart Damper™ | RADIAL APPLICATION The 75F® Smart Damper™ is to be used as part of the 75F® Dynamic Airflow Balancing™ solution. The Smart Damper will be paired with a 75F® Smart Node™ which will provide power and control.
- Page 2 WIRING Secondary Primary Fig.1 Powering the Smart Damper Smart Node. Using the correct polarity, plug the 24VAC 18/2AWG coming from either the transformer or from the previous Smart Node of a different zone. Color code so that red is always in the ~ port. Strip back 18/2AWG wire ~1/2” and insert until wire is locked in place.
- Page 3 75F TECHNICAL SUPPORT If you need more information, please visit www.75f.io/support. Here installers will find instructional videos, installation guides, and more. You can also call (651) 504.4175 if you need technical support.
Need help?
Do you have a question about the Smart Damper and is the answer not in the manual?
Questions and answers