Table of Contents
Advertisement
WARNING
Disconnect the electrical supply before servicing or cleaning the unit. Failure to do
so could result in electrical shock or personal injury from cleaner suddenly
starting.
Removing and Installing Lower Plate
Latch
Taquets
Broche
Locking
Tab
Loquet de
sûreté
Guía de
cierre
Fig. 2
Latch
Taquets
Broche
Locking
Tab
Loquet de
sûreté
Guía de
cierre
Electrical Shock or Personal Injury Hazard
➢ Before servicing any parts,
Locking
disconnect vacuum from electrical
Tab
Loquet de
outlet.
sûreté
Guía de
➢ Always place paper under nozzle
cierre
whenever lower plate is removed to
protect floor.
➢ Place handle in upright position and
turn vacuum over to expose lower
plate.
Fig. 1
➢ Release lower plate by pressing two
(2) latches and two (2) locking tabs
inward as shown. (Fig. 1)
➢ Remove lower plate and remove any
residue that may exist in belt area.
➢ Reinstall lower plate by hooking front
end of lower plate into slots on front
Tabs
of nozzle housing. (Fig. 2)
Languettes
Lengüetas
Locking
➢ Press lower plate until locking tabs
Tab
snap into place then push the two (2)
Loquet de
sûreté
latches outward. (Fig. 3)
Guía de
cierre
Fig. 3
- 36 -
Advertisement
Table of Contents
