Magnifying Images; Changing Image Transitions - Canon PowerShot A2100 IS User Manual

k Magnifying Images
Approximate Location
of Displayed Area

+ Changing Image Transitions

You can select from three transition effects when switching between images
in single image playback.
Switches between images without a transition effect.
Fades one image out and the next in.
Slides images left or right when the qr buttons are pressed.
94
Move the zoom lever toward k.
●
The display will zoom in on the image and
will appear. If you continue to hold
the zoom lever, it will continue to zoom in
up to a factor of 10x.
If you press the opqr buttons, you can
●
move the location of the displayed area.
Move the zoom lever toward g to zoom
●
out or return to Single Image Playback.
●
When
press the m button to switch to
Press the qr buttons to switch between
images at the same level of magnification.
Press the m button again to return to
.
Select [Transition].
Press the n button and select the 1
●
tab, then select [Transition] and use the
qr buttons to select a transition effect.
Press the n button to accept the
●
setting.
appears on the screen,
.