Canon PowerShot A2100 IS User Manual page 119

Cannot complete!
•
Print settings or transfer settings could not be saved correctly. Reduce the
number of settings and try again (p. 102).
Naming error!
•
The file name could not be created because there is an image with the same
name as the folder that the camera is attempting to create, or the highest
possible file number has already been reached (p. 107). In the 3 menu, change
[File Numbering] to [Auto Reset] (p. 107) or format the memory card (p. 49).
Communication error
•
Images could not be transferred to the computer or printed due to the large
amount of images (approx. 1000) stored on the memory card. Use a
commercially available USB card reader to transfer the images to the computer.
To print, insert the memory card into the printer's memory card slot.
Lens error, restart camera
•
A lens error was detected. Press the power button to turn the camera off and
back on (p. 40). If this error message continues to display, contact your Canon
Customer Support Help Desk as there may be a problem with the lens.
•
This error can occur if you hold the lens while it is in motion or when using it in a
location with excessive dust or sand in the air.
Exx (xx: number)
•
A camera error was detected. Press the power button to turn the camera off and
back on (p. 40).
•
If an error code displays directly after taking a picture, the shot may not have
been recorded. Check image in playback mode.
•
If this error code reappears, note the number and contact your Canon Customer
Support Help Desk as there may be a problem with the camera.
List of Messages that Appear on the Screen
119