AEG L6FLI48S User Manual page 22

22 www.aeg.com
Make sure that the flap does not cause a
blockage when you close the drawer.
12.5 Setting a programme
1. Turn the programme dial to select the
desired washing programme. The
related programme indicator comes
on.
The indicator of the Start/Pause button
flashes.
The display shows an indicative
programme duration.
2. To change the temperature and/or
the spin speed, touch the related
buttons.
3. If desired, set one or more options by
touching the related buttons. The
related indicators come on in the
display and the given information
changes accordingly.
In case a selection is not
possible, no indicator
comes on and an acoustic
signal sounds.
12.6 Starting a programme
with the delay start
Touch the Start/Pause
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts.
The PROSENSE adapts
starts at the end of the
countdown.
Cancelling the delay start
after the countdown has
started
To cancel the delay start:
1. Touch the Start/Pause
2. Touch the Delay Start
3. Touch the Start/Pause
Changing the delay start after
the countdown has started
To change the delay start:
1. Touch the Start/Pause
2. Touch the Delay Start
3. Touch the Start/Pause
12.7 Starting a programme
Touch the Start/Pause button to start the
programme.
The related indicator stops flashing and
stays on.
The programme starts, the door is
locked. The display shows the indicator
button.
12.8 The ProSense load
detection
1. The appliance detects the load in the
pause the appliance. The related
indicator flashes.
repeatedly until the display shows
again to start the programme
immediately.
pause the appliance. The related
indicator flashes.
repeatedly until the display shows the
desired delay time.
again to start the new countdown.
.
The drain pump can operate
shortly before the appliance
fills water.
The programme duration in
the display is referred to a
medium/high load.
first 30 seconds: the indicator
the time dots flash, the drum rotates
shortly.
button to
button
.
button
button to
button
button
and