Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Telnova Manuals
  4. Control Unit
  5. F-3076
  6. User manual

Telnova F-3076 User Manual

Class2 bluetooth module for audio application
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
Telnova Technology Co.,Ltd
This module is limited to OEM installation ONLY
Features
. Bluetooth V2.1+EDR specification support
. A2DPv1.2
. AVRCPv1.0
. HFPV1.5
Applications
. This module applies only to the following Bluetooth speaker:
Manufacturer : Telnova Technology Co.,Ltd
Producted name: Bluetooth Spesaker
Model name:MBT-301
Brand name:N/A
Block Diagram
This is part circuit structure: The encoder IC IS1685N(OSC16MHz), it is a single chip radio and
basedand is for Bluetooth 2.4GHz systems including enhanced data rates(EDR) to 3MBPS; The
EEPROM 24C32, it is a single chip 8 megabit(1024X8-bit-/512kx16-bit) Flash memoy, CMos
3.0 Volt-only. The module Supports Bluetooth v2.1. the Frequency range: 2402-2480MHz. The
module also has necessary balun and bandpass filters to interface with a build-in PCB antenna,
which forms a very cost effective radio subsystem.
Bluetooth Module for Audio Application
F-3076 Class2 Bluetooth Module
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the F-3076 and is the answer not in the manual?

Questions and answers

Related Manuals for Telnova F-3076

Summary of Contents for Telnova F-3076

  • Page 1 Telnova Technology Co.,Ltd This module is limited to OEM installation ONLY Bluetooth Module for Audio Application F-3076 Class2 Bluetooth Module Features . Bluetooth V2.1+EDR specification support . A2DPv1.2 . AVRCPv1.0 . HFPV1.5 Applications . This module applies only to the following Bluetooth speaker: Manufacturer : Telnova Technology Co.,Ltd...
  • Page 2 Telnova Technology Co.,Ltd Physical Layout and Size...
  • Page 3 Telnova Technology Co.,Ltd Pins Configurations General Electrical Specification...

  • Page 4: Radio Characteristics

    Telnova Technology Co.,Ltd Radio Characteristics...

  • Page 5: Installation Diagram

    3 Up to five exceptions are allowed in v2.0 of the Bluetooth specification 4 Up to three exceptions are allowed in v2.0 of the Bluetooth specification 5 Measured at F0 = 2441MHz Installation diagram Module Installation location( Telnova Technology Co.,Ltd MBT-301 Bluetooth Spesaker) Module Installation location Module Installatio...

  • Page 6: Fcc Statement

    Label requirements: Contains Transmitter Module FCC ID: WY9F-3076 Host use instruction: The module must install and work with a speaker, The speaker’s manufacturer is Telnova Technology Co., Ltd.. MBT-301 The Host mode name: BLUETOOTH SPEAKER The Host Brand Name: N/A FCC RF Exposure Requirement At least 20cm separation distance between the antenna and the user’s body must be maintained at all times.
  • Page 7 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. 3.A label must be affixed to the outside of the end product into which the F-3076 Module is incorporated, with a statement similar to the following: For F-3076: This device contains FCC ID: WY9F-3076.
  • Page 8 Contains Transmitter Module FCC ID: WY9F-3076” OR “Contains FCC ID: WY9F-3076” The OEM of the F-3076 Module must only use the approved antenna(s) listed above, which have been certified with this module. The device F6088 carries FCC authorization and is marked with the FCC ID Number.
  • Page 9 Telnova Technology Co.,Ltd If this module is intended for use in a portable device, you are responsible for separate approval to satisfy the SAR requirements of FCC Part 2.1093. The user manual for the end product must include the following information in a prominent location:...