Zte A2121L Quick Start Manual page 10

designed to operate at multiple power levels so as to
use only the power required to reach the network. In
general, the closer you are to a wireless base station
antenna, the lower the power output.
The exposure standard for wireless devices
employing a unit of measurement is known as the
Specific Absorption Rate, or SAR. The SAR limit set by
the FCC is 1.6 W/kg.
This device is complied with SAR for general
population/uncontrolled exposure limits in ANSI/IEEE
C95.1-1992 and had been tested in accordance with
the measurement methods and procedures specified
in IEEE1528.
The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this model phone is
on file with the FCC and can be found under the
Display Grant section of www.fcc.gov/oet/ea/fccid
after searching on FCC ID: SRQ-ZTEA2121L . The FCC
ID also can be found on the device when you
openSettings > About phone > FCC ID.
For this device, the highest reported SAR value for
usage against the head is 0.80 W/kg, and for usage
near the body is 0.90 W/kg.
While there may be differences between the SAR
levels of various phones and at various positions, they
all meet the government requirements.
SAR compliance for body-worn operation is based on
a separation distance of 10 mm between the unit and
the human body. Carry this device at least 10 mm
away from your body to ensure RF exposure level
compliant or lower to the reported level. To support
body-worn operation, choose the belt clips or
10