Table of Contents
Advertisement
Creating a party
atmosphere (DJ Effect)
Use the keys and GESTURE
CONTROL sensor on the touch panel
of the unit to perform this operation.
1
Touch GESTURE ON/OFF.
The GESTURE CONTROL lights up.
2
Touch DJ or SAMPLER.
The DJ or SAMPLER mode is
activated.
3
Swipe your hand over the
GESTURE CONTROL sensor.
For DJ mode:
To
1
Select FLANGER*
Select ISOLATOR*
3
Select WAH*
Select PAN*
4
Increase the level
of the selected
effect
Reduce the level
of the selected
effect
1
*
Creates a deep flanging effect that
is similar to the roar of a jet plane.
*
2
Isolates a specific frequency band
by adjusting the other frequency
bands. For example, when you want
to focus on vocals.
*
3
Create a special effect of "Wah-
wah" sound by moving the
frequency of a filter up and down
automatically.
*
4
Create a feeling that the sound
is moving around the speakers
between left and right channels.
Swipe in this
direction
2
For SAMPLER mode:
To
Output "Come
On!"
Output "Let's Go!"
Output Reggae
Horn sound effect
Output Phaser
sound effect
Output Scratch
sound effect
Output Audience
sound effect
To output the SAMPLER mode
sound effect
Touch SAMPLER, then touch one of
the direct function key (CD, USB, FM,
AUDIO IN, MUSIC SERVICE) to output
the sound effect you want.
To turn off the DJ mode
Swipe your hand over the GESTURE
CONTROL sensor in the same
direction as in step 3 above.
Note
The DJ Effect is automatically turned off
• •
when you:
— turn off the system
— change the function
— deactivate the Gesture Control
— change the mode to PLAYBACK/
SAMPLER/KARAOKE
If you activate the DJ Effect during
• •
transferring, the sound effect will not be
transferred onto the USB device.
Swipe in this
direction
41
US
Advertisement
Table of Contents
