Controlling Zone2 - Yamaha AVENTAGE RX-A1080BL Owner's Manual

MAIN/ZONE 2
MAIN ZONE 2
z
SLEEP SLEEP
PARTY T T PARTY PURE DIRECT PURE DIRECT HDMI OUT HDMI OUT
SCENE SCENE
1 1 2 2 3 3 4 4
5 5 6 6 7 7 8 8
INPUT
Input selection keys
TUNER NET USB BLUETOOTH
PRESET PRESET
RED RED GREEN GREEN YELLOW YELLOW BLUE BLUE
TOP TOP POP-UP POP-UP
HOME HOME
MENU MENU / / MENU /MENU
AI AI
SUR. DECODE SUR. DECODE
PROGRAM PROGRAM VOLUME VOLUME
ENHANCER ENHANCER
STRAIGHT STRAIGHT
MEMORY MEMORY
TUNING TUNING BAND BAND TUNING TUNING

Controlling Zone2

1
Set MAIN/ZONE2 to "ZONE2".
2
Press z (receiver power).
Each time you press the key, Zone2 is enabled or disabled.
When Zone2 is enabled, "ZONE2" lights up in the front display.
3
Use the input selection keys to select an input source.
Y
• Audio signals that can be output to Zone2 vary depending on how you connect
the device in Zone2 to the unit's output jacks. For details, see "Multi-zone
output" (p.162).
• You cannot select Bluetooth, USB and network sources exclusively for each
zone. For example, if you select "SERVER" for Zone2 when "USB" is selected
for the main zone, the input source for the main zone also switches to
"SERVER".
4
Start playback on the external device or select a radio
station.
Refer to the instruction manual for the external device.
For details on the following operations, see the corresponding
pages.
• Listening to FM/AM radio (except Australia, U.K., Europe, Middle
East and Russia models) (p.67)
• Listening to DAB radio (Australia, U.K., Europe, Middle East and
Russia models only) (p.70)
• Listening to FM radio (Australia, U.K., Europe, Middle East and
Russia models only) (p.75)
• Playing back music via Bluetooth (p.79)
• Playing back music stored on a USB storage device (p.80)
• Playing back music stored on media servers (PCs/NAS) (p.83)
• Listening to Internet radio (p.87)
• Playing back iTunes/iPod music with AirPlay (p.90)
Y
AirPlay is available in Zone2 only when AirPlay playback is ongoing in the main
zone.
X
• The Zone2 input automatically switches in conjunction with the input source
selected in the main zone when "Main Zone Sync" is selected as the Zone2
input with the AV CONTROLLER (p.9) or input selection keys (p.15).
• To play back DSD audio in Zone2, select "Main Zone Sync" as the Zone2 input
or use the party mode (p.97).
• Depending on the "Remote Key" (p.134) setting in the "System" menu, the
PROGRAM key may be also available in Zone2.
Caution
To avoid unexpected noise, never play back DTS-CDs in Zone2.
96
En