Reference; Setup Menu - Panasonic DP-UB420-K Owner's Manual

Setup menu

Reference

Change the unit's settings if necessary. The
settings remain intact even if you switch the unit
to standby.
1
Press [HOME].
2
Select "Setup".
3
Select "Player Settings".
Player Settings
Resolution
HDMI
4K60p Output
Video
24p Output
HDMI(VIDEO) Output Mode
Audio
HDMI(AUDIO) Output Mode
3D
HDR10+ Setting
Advanced Settings
Language
Network
Ratings
System
OK
RETURN
4
Select an item and change the settings.
To exit the screen
Press [HOME].
HDMI
∫ Resolution
The items supported by the connected devices
are indicated on the screen as "¢". When any
item without "¢" is selected, the images may be
distorted.
≥ If "Auto"* is selected, the best suited output
1
resolution to the connected TV is automatically
selected.
∫ 4K60p Output
This unit automatically chooses to output images
in 4K* 60p when connected to a 4K/60p
2
compatible TV.
≥ This item is available only when "Resolution" is
set to "Auto" and "4K".
≥ This item is not available when "HDMI(AUDIO)
Output Mode" is set to "Video+Audio".
≥ To connect to a TV that supports 4K/60p (4:4:4/
8 bit) or 4K/60p (4:2:2/12 bit), select "4K/
60p(4:4:4)".
Images will not be output correctly with an
HDMI cable that does not support 18 Gbps.
≥ To connect to a TV that supports 4K/60p (4:2:0/
8 bit), select "4K/60p(4:2:0)".
Reference
∫ 24p Output
Content recorded at 24p*
films, is output at 24p when played back.
≥ When this unit is connected to TV compatible
with 4K/24p and "Resolution" is set to "Auto" or
"4K", images will be output in 4K/24p.
≥ When this unit is connected to a TV compatible
with 1080/24p and "Resolution" is set to "Auto",
"1080i" or "1080p", images will be output in
1080/24p.
≥ If images output in 24p are distorted, change
the setting to "Off".
Auto
Off
∫ HDMI(VIDEO) Output Mode
Auto
Auto
Set whether or not to output audio from the HDMI
Audio Only
On
VIDEO OUT terminal.
≥ When an amplifier is connected to the HDMI
AUDIO OUT terminal and this menu item is set
to "Auto ( Video Only / Video+Audio )", the TV
may not output audio. In that case, select
"Video+Audio".
∫ HDMI(AUDIO) Output Mode
Set whether or not to output images from the
HDMI AUDIO OUT terminal.
≥ It is not possible to output 3D, 4K or HDR
content from the HDMI AUDIO OUT/HDMI
VIDEO OUT terminal when "Video+Audio" is
selected.
∫ HDR10+ Setting
You can set enable/disable of the HDR10+
function.
By changing this setting to "On", you can use the
HDR10+ function under the following conditions:
– A device that supports HDR10+ is connected
( 10).
– A disc that supports HDR10+ is played back.
≥ The "Optimum HDR Adjustment" setting is
disabled while using the HDR10+ function.
( 27)
- 29 -
, such as BD-Video
3