Understanding The Indicators - Panasonic BL-PA300KTA Operating Instructions Manual

Understanding the indicators

PLC Green, lit
Green, flashing The terminal is being registered to the master.
Green, flashes
once every 5
seconds
Red, lit for 5
seconds
Red, lit
Off
LAN Green, lit
Green, flashing Data is being sent/received.
Orange, lit
Off
MASTER Green, lit
Green, flashes
for 10 seconds
Off
The adaptor is successfully connected to the
HD-PLC network.
The adaptor is registered to the master, but it is
not connected to the HD-PLC network.
There was an error during registration. Try
again.
The adaptor is not functioning properly and
cannot communicate over the HD-PLC
network. Contact an authorized Panasonic
service center.
The adaptor is not plugged in.
The adaptor is not connected to the HD-PLC
network (no other adaptors found, not
configured, etc.).
A LAN cable is connected to the adaptor.
There is no network device connected to the
adaptor via the LAN cable, or the network
device is not turned on.
The adaptor is not plugged in.
Power Save is active. (See page 15)
The adaptor is configured as the master.
A terminal has been successfully registered to
the master.
The adaptor is not configured as the master.
[For assistance, please call: 1-800-272-7033]
Useful Information
19