Table of Contents
Advertisement
PPPoE Connection
The PPPoE Connection command allows you to manually initiate/stop your
KX-HGW200 PPPoE connection to the ISP. Depending on the PPPoE
connection status, two different kinds of web screens appear. You can
initiate/stop the PPPoE connection by clicking the button on the web
screen.
When the PPPoE connection is being made
The window below appears.
1
When the PPPoE connection is not being made
The window below appears.
1
Note:
To use this command, the PPPoE connection of your KX-HGW200
must have been set to Automatic or Manual on the KX-HGW200
administration web screen. See p. 34 for more detail information.
To disconnect the PPPoE connection, click [Disconnect].
To initiate the PPPoE connection, click [Connect].
For assistance, please call: 1-800-272-7033
"
41
Advertisement
Table of Contents
