Registering And Starting The Sample Program (Php_Um_E_Sample_Verx.xx.zip) - Epson TM-i Series Setup Manual

Registering and Starting the Sample program (PHP_UM_E_Sample_Verx.xx.zip)

This section briefly explains the procedure for registering the sample program to a web server.
For detail, see Chapter 2 [Setup] in the Technical Reference Guide for the TM-i used.
Download PHP_UM_E_Sample_Verx.xx.zip. For details, refer to
(p.12).
1. Connecting TM-i to Network
Connect the TM-i to the same network as the setting computer, and turn its power on.
2. Start EPSON TMNet WebConfig
Access the address bar of the Web browser on the PC for setting to start EPSON TMNet WebConfig.
 TM-i Firmware Ver.4.0 or later
http://TM-i's IP address/webconfig/PHPSetting
 TM-i Firmware Ver.3.x or earlier
http://TM-i's IP address/PHPSetting
3. Registering Web contents
From [Web Contents] - [Update Settings] in the [Web Service Settings] menu, or [Web Contents] in the
[Network] menu, register the Web contents to TM-i.
Click [Browse...], specify the zip file (PHP_UM_E_Sample_Verx.xx.zip) to be registered, and then click
[Upload].
4. Start the Sample program
Access the address bar of the Web browser to start the sample program.
http://TM-i's IP address/webapp/PHP_UM_E_Sample/index.html
Chapter 3 Sample Program
Contents in the Package
3
21