Page 1
Instruction manual Floating Pond Skimmer CSP-250 52371 Illustration similar, may vary depending on model Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps and technical data may deviate insignificantly due to continuous further...
Page 2
The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man- ual, nor in the diagrams and illustrations shown.
Page 3
Introduction Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to always take some basic safety precautions when using this product. Please read this operating manual carefully and make sure that you understand it. Keep these operation instructions in a safe place.
Page 4
Installing the product • Before installing, carefully read the safety instructions. • Connect all parts of the product and check them for defects or lacks. • Attach a cord to the bottom part of the product. • Put the product into the water and fill it with the water. •...
Operation modes 1. “Fountain” mode is activated with the fountain unit (1–4) being installed and the reversing valve (12) being in “fountain” position. 2. “Skimmer” mode is activated with the filter basket handle (6) being installed and the reversing valve (12) being in “skimmer” position. Cleaning and maintenance 1.
Page 8
Regulations for waste disposal The Waste Electrical and Electronic Equipment Directive (WEEE Directive, 2012/19/EU) of the EU was implemented in the German law related to electrical and electronic equipment and appliances. All WilTec electric devices that fall under the WEEE directive are labelled with the symbol of a crossed- out wheeled rubbish bin.
Need help?
Do you have a question about the CSP-250 and is the answer not in the manual?
Questions and answers