Advertisement
Open the refrigerator door and remove all fittings inside the door.
Remove the upper hinge cover
Remove the two screws
Carefully lift the door and place it on a padded surface to prevent scratching.
Remove the screw hole cover
side of the unit. Be sure to press the button firmly into the hole.
Remove the screw
stopper to the other side of the door, and fix it with screw.
Remove the two screws
Remove the bottom feet
Set the door into its new place making sure the pin enters the bushing at the lower frame section (hole).
Secure the upper hinge
the bushing on the upper frame section (hole).
Loosely secure the lower hinge
leveled.
Replace the upper hinge cover
Turn the door upright again.
Open the door and attach all fittings.
.
that connect the upper hinge
and hinge hole cap
attached to the door stopper
that hold the lower hinge
and transfer it to the right side of the cabinet.
previously removed in step 4 on the left side of the unit. Make sure the pin enters
and do not tighten the bolts until the door is in the closed position and
.
on the right side of the ca
and transfer it to the uncovered hole on the right
, then remove the door stopper, replace the door
on the right side of the cabinet.
top.
Advertisement
