Lippert Components WiFi On-the-Go System Configuration
  1. Manuals
  2. Brands
  3. Lippert Components Manuals
  4. Wireless Router
  5. WiFi On-the-Go
  6. System configuration

Lippert Components WiFi On-the-Go System Configuration

Hide thumbs Also See for WiFi On-the-Go:
1
2
3
4
Table of Contents

Advertisement

Quick Links

Download this manual
SYSTEM CONFIGURATION FOR WIFI ON-THE-GO
Introduction
After successful activation of WiFi On-the-Go
4G LTE wireless hotspot*.
Note: For the best security, the settings should be configured with the WiFi On-the-Go wired via Ethernet
cable and a personal computer.
Pressing ReSet on the back of the cellular gateway will make the device inoperable.
Do not press the RESET button on the back of the cellular gateway unless directed by LCI Customer Service.
Pressing RESET will take the device back to factory settings and make the device inoperable.

System Requirements

• AT&T® or Rogers™ nano SIM card
• Android, iOS smart device or personal computer
• Ethernet cable (optional)
Connecting to WiFi on-the-Go™
1.
From the device's Wi-Fi settings, select the WiFi On_the_Go_XXXX (where XXXX means the numbers at
the end will vary). The password will be blank.
2.
To change the administrator password, rename the hotspot (ESSID) and set the security settings with a
login password:
A. Open a web browser.
B. Type 192.168.1.1 into the address bar.
C. When prompted, enter the following default Username (Fig. 1A) and Password (Fig. 1B), then click
Login (Fig. 1C):
I.
Username: root
II. Password: admin
C
* Internet access is not provided. Product usage may incur extra data and/or connection charges.
Rev: 01.31.19
ELECTRONICS
, use a smart device or a personal computer to connect to the
™
Do Not press ReSet. Contact LCI Customer Service.
A
B
Fig. 1
Page 1
TM
CCD-0001842

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WiFi On-the-Go and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lippert Components WiFi On-the-Go

Summary of Contents for Lippert Components WiFi On-the-Go

  • Page 1 ™ 4G LTE wireless hotspot*. Note: For the best security, the settings should be configured with the WiFi On-the-Go wired via Ethernet cable and a personal computer. Pressing ReSet on the back of the cellular gateway will make the device inoperable.
  • Page 2 SYSTEM CONFIGURATION FOR WIFI ON-THE-GO ELECTRONICS At the top menu bar, select "System" dropdown menu (Fig. 2A), then select "Administration" (Fig. 2B). Fig. 2 Enter a new administrator "Password" (Fig. 3A), then re-enter password in the "Confirmation" field (Fig. 3B).
  • Page 3 SYSTEM CONFIGURATION FOR WIFI ON-THE-GO eLeCtRoNICS A. Click on the Edit button (Fig. 6A) under the Wireless Overview section, then scroll to the Interface Configuration at the bottom of the page. Fig. 6 B. Make sure the "General Setup" tab is selected to rename the hotspot (ESSID) (Fig. 7A), if desired.
  • Page 4 SYSTEM CONFIGURATION FOR WIFI ON-THE-GO ELECTRONICS II. Enter a login password in the "Key" field (Fig. 11A). The password MUSt be at least eight characters. Click on Save & Apply button (Fig. 11B). Note: "Waiting for changes to be applied" dialog window may be visible until sign-in is complete.

Table of Contents